Contact us for more details

table top_b_class_dental_FI050816

table top_b_class_medical_FI080516

table top_S_class_dental_FI080516

table top_s_class_Medical_FI080516

table top_b_class_laboratory_FI090516

table top_S_class_laboratory_FI090516

[contact-form-7]

Main features

SINGLE PHASE THERMAL DISINFECTION INSTRUMENT WASHER ACCORDING TO EN 15883 – DRYING SYSTEM

• WASHING UP TO 95°C – THERMAL DISINFECTION
• MICROPROCESSOR PROGRAMMABLE ELECTRONICS, UP TO 15 PROGRAMS
• SERIAL PORT RS232 FOR CONNECTION TO EXTERNAL PRINTER OR PC
• LIQUID DETERGENT DOSAGE PUMP WITH SENSOR LEVEL
• NEUTRALIZER LIQUID DOSAGE PUMP WITH SENSOR LEVEL
• STAINLESS STEEL CHAMBER AISI 316L AND EXTERNAL PANELS IN AISI 304
• EXTERNAL DIMENSIONS LXWXH (MM) 450650X850
• INTERNAL WORKING DIMENSIONS LXWXH (MM) 380X480X590
• CHAMBER VOLUME: 107 LITERS
• INCORPORATED WATER SOFTENER – VOLUMETRIC REGENERATION WITH SALT LEVEL SENSOR
• WATER SUPPLY: COLD WATER AND DEMINERALIZED WATER CONNECTION
• ELECTRICAL CONNECTION: I/N/PE 230V – 50Hz 3.3Kw

SME-WD2145D TECHNICAL FEATURES (All Versions)

Electronic control	Microprocessor
Standard programs stored	15
Customized programs	6
Traceability	Storage of data 100 most recently run programs
Communication Led Icons	yes
Cycle storage	Yes, WD trace/excel format
Phase parameters	type of water, detergent quantity, target temperature, extension time in minutes, temperature
Tank internal temperature	from room temperature to 95°C
Accuracy	0.1°C
Temperature sensors in wash chamber	2 x PT 1000 CLASS B IEC 60751
Detergent dosing pumps	2 liquid pumps
Detergent level sensor	Yes
Duct for introducing external temperature probes	yes
RS232 serial port for PC connection printer	yes
Safety Features	Safety Thermostats, door interlock
Safety Lock	Yes, with electromagnetic release and automatic opening
Alarm display and message indicators	9
Vapor condenser	yes
AUXILIARY FUNCTIONS
WATER SUPPLY (PRESSURE 1 ,5-5 BAR)
Cold water inlet	yes
Water softener incorporated	yes
WATER HEATING
Electrical	3 kW max.
STEAM CONDENSER	Yes
DIMENSIONS LxDxH mm
Outside              (with built-in top)Inside Net weight (Kg)	450x650x850 (830)380x480x590 50
STAINLESS STEEL
Wash tank	ASI 316L
Exterior covering	ASI 304
ELECTRICAL POWER SUPPLY
Max. voltage/power	I/N/PE 230V – 50Hz 3.3Kw
NOISE LEVEL	max 50 dB
Conformity	93/42/CEE,72/23/CEE,93/68/CEE,89/336/CEE,EN61010-1,EN60110-2-045,EN61326:1997+A1:1998,EN153883-1-2:2006

 

 

Model	Volume	Chamber Dimensions mm	Overall dimensions mm (WxHxL)	Voltage	power
SME-WD2145D	107 L	LXWXH (MM) 380X480X590	LXWXH (MM) 450X650X850(830)	1/N/PE 230V – 50Hz 3.3 Kw	3.3 KW MAX

 

BASIC UPPER TROLLEY 45CMBasic upper Basic lower trolley 45CMBasic lower trolley for the SME-WD2145D model. It holds baskets and supports for surgical instrument treatment.D-CS2 trolley with sprayer for the SME-WD2145D model. It holds baskets and supports for surgical instrument treatment.D-CS1

Basic lower trolley 45CMBasic lower trolley for the SME-WD2145D model.It holds baskets and supports for surgical instrument treatment.D-CS2

D-SM6 HAND PIECE WASHING SUPPORTHand piece washing support for SME-W2145D. It is supplied with a standard set consisting of 6 silicone rings, 6 filters and 2 nozzles. Made of stainless steel.

D-SM6+D-CS1HAND PIECE ON TROLLEYHand piece washing support D-SM6 must be positioned on D-CS1 trolley as shown in the figure at the side.

Many more accessories are available according to your needs.

Download product datasheet

[contact-form-7]

Main features

– Microcomputer control with LCD display and touch buttons
– Temperature, time and running status are displayed and error alarms will sound if there is a problem.
– Water filling, heating, sterilization, exhaust and drying are fully automatic.
– Special positive pressure pulse for exhaust completely eliminates cold air in chamber.
– Heat drying function can reduce humidity residue to less than 3%.
– Steam-water internal circulation system doesn’t need water connection. (They are needed only for models 5070/5090 which need to be connected to the water tap connection to supply the steam generator)
– Chamber heating system heats up quickly with uniform temperature during the pre-heating stage.
– Various programs such as instruments textiles and rubber can be chosen.
– Buzzer will alarm at the end of the cycle.
– Printer is optional and can print the date, time and complete cycle process

Safety devices

– Overheating protection: there is an extra protection to stop any overheating.
– There is an extra protection to avoid any over pressure.
– Door interlock device: The program can only start after the door is closed completely with the electronic door lock. The door cannot be opened if there is pressure in chamber or the power is switched off.
– Short circuit safety device: For alternating current the major loop has a short circuit device. Direct current loop has over voltage protection

Technical parameters

Design pressure: 0.28Mpa

Maximum working pressure: 0.23Mpa

Vacuum degree: -80Kpa

Cycle time: 35—50 minutes

Chamber material: SUS304 stainless steel

Water requirement: Distilled water

Design temperature: 150°C

Sterilization temperature: 121/134°C

Maximum working temperature: 135°C

Technical parameters

Temperature uniformity: ≤±0.5°C

 

Model	VolumeLiters	Chamber Dimensionsmm	Overall dimensions mm (WxHxL)	Voltage	power
MOON-TMQ.C	60	380×500	800x725x520	220V	3.6Kw
MOON-TMQ.C	80	380×700	950x725x520	380V	5.8Kw
MOON-TMQ.C	135	500×700	1000x710x1700	380V	7.3Kw
MOON-TMQ.C	185	500×950	1250x710x1700	380V	8.7Kw

Download product datasheet

[contact-form-7]

MOON- Ultrasonic series

Main features

ULTRASONIC CELANERS: WASHING SOLUTIONS

Moonmed offers a range of ultrasonic cleaners suitable for washing delicate instruments,

Instruments with special shape or used in contact with materials difficult to be cleaned. Our

Ultrasonic cleaners have different sizes in order to better satisfy washing needs. Their use

is easy and intuitive. The stainless steel they are made of will make their cleaning simple

and quick. It is possible to connect the drain to the rear in order to guarantee greater

autonomy of use.

On the front side of this appliance you will find knobs to adjust cleaning time and temperature, as

well as buttons to choose special cleaning functions (DEGASS, SWEEP, BOOST).

DEGASS: thanks to this function degassing is

rapid and without bubbles. Its cleaning is quick and effective.

SWEEP: it facilitates homogeneous distribution of ultrasonic waves into the liquid. This ensures a

better cleaning.

BOOST: it dissolves harder impurities using a higher ultrasonic frequency.

THREE DIFFERENT MODELS

TECHNICAL FEATURES	SME-VU03H	SME-VU06H	SME-VU13H
Ultrasound Frequency	38kHz	38kHz	38kHz
Maximum Peak Ultrasound Power	320W	600W	800W
Heater Power	200W	400W	800W
Total Power Consumption	280W	500W	1000W
Ultrasound Intensity	4.1W/cm²	2.6W/cm²	2.6W/cm²
Boost	YES	YES	YES
Sweep	YES	YES	YES
Degasification Auto degasification	YES	YES	YES
Dimensions
Chamber Volume L	2.75	5.75	12.75
Internal Chamber Dimensions	240x137x100mm	300x151x150mm	300x240x200mm
External Chamber Dimensions	300x179x214mm	365x186x264mm	365x278x321mm
Net Weight	3.3kg	6.0kg	7.5kg
Handle	YES	YES	YES
Stainless Steel
Chamber	AISI 304	AISI 304	AISI 304
External Housing	AISI 304	AISI 304	AISI 304
Power Supply
Voltage	230V-50Hz	230V-50Hz	230V-50Hz

 

Models	Liters	Frequency	Drain	Heating	Internal dimensions LxWxH
SME-VU03H	3 LT	38KHz	NO	YES	240 x 137 x 100 mm
SME-VU06H	6 LT	38KHz	YES	YES	300 x 151 x 150 mm
SME-VU13H	13 LT	38KHz	YES	YES	300 x 240 x 200 mm
SME-VU30H	30 LT	38KHz	YES	YES	505 x 300 x 200 mm
SME-VU45H	45 LT	38KHz	YES	YES	500 x 300 x 300 mm
SME-VU90H	90 LT	38KHz	YES	YES	600 x 500 x 300 mm

 

CLEANERS: APPLICATION

Ultrasonic cleaners represent a perfect solution for washing drills, dental molds and dental

implants. With Moonmed ultrasonic cleaners an effective cleaning of your instruments will be

reached. At the same time, the cleaning process will respect and preserve the material the instruments are made of.

SOME ACCESSORIES / DETERGENTS SUITABLE FOR ALL OUR

ULTRASONIC CLEANERS

BASKET: with handles, made of stainless steel. Adaptable to all our ultrasonic cleaners.

LID: made of plastic. Adaptable to all our ultrasonic cleaners.

BEAKER FOR ULTRASONIC CLEANERS: made of Pyrex. Ideal for small size accessories.

 

BEAKER SUPPORT FOR ULTRASONIC CLEANERS: 2 beaker holder. Adaptable to all our ultrasonic cleaners.

DETERLIQUID VI, V2, V3, V4: Moonmed also offer a vast range of detergents in order to better satisfy different cleaning needs.

Some examples: Deterliquid VI is ideal for dental implants, while V3 is specific for cements.

Download product datasheet

[contact-form-7]

­MOONMED ROTARY SEALERS

Moonmed Rotary Sealers with built-in printer are specially designed to meet the demand of high volume operations in hospitals and medical device industries.

Common sterilization packaging processes require traceability of sealed pouches to ensure patient/medical device safety and control at all times. The built-in printer in the Rotary Sealer ensures the end-user that all essentials data needed for traceability can be printed on the back side of the pouch.

Each model housing is made of AISI 304 stainless steel, which reduces maintenance to a minimum and ensures hygienic use in CSSD’s.  The temperature settings are controlled by microprocessors and can be adjusted between 50˚C to 200˚C with a ±1% tolerance.

A hermetically sealing is ensured for a wide variety of materials like sealable pouches and reels according to EN 868-5 and ISO 11607-1, Tyvek® 1059B, 1073B and 2FS.

Essential data to be printed on the sterilization packaging, can be easily entered and monitored by the user through the large LCD panel.

• Seal date
• expiry date
• operator name/code
• lot number details

This will be printed automatically during the optical sensor controlled feeding. All machines carrying the Moonmed brand are validated, calibrated and in compliance with international standards.

STE-SM1030

With growing global population, combined with developing healthcare services and medicine technologies, the number of people benefiting from hospitals and healthcare services is increasing rapidly. Due to increased demand, the quality of service and productivity gain more importance for sector managers,healthcare workers and suppliers. Moonmed SME-SM1030 series medical sealing device for hospital and industry applications is a combined self-cutting and sealing system that is contributing to your productivity, flexibility and independence providing an unparalleled blend of benefits:

• Productivity
• Safe & Secure
• Cost effective
• Time saving

So, how does it work? The built-in rotary sealing system integrates with feeding the automatic system continuously and seals the reel right below the cutting line. The medical sealing system can also be used separately for cutting or sealing operations.In principle, the Moonmed SM1030 series combines a roll dispenser and a rotary sealing device. Unlike usual roll dispenser & cutting devices, this operation is fully automatic. After the length and quantity adjustments are determined through the panel, it produces the ready to fill pouches from any sterilization reel in the required length and quantity.

TECHNICAL SPECIFICATIONS STE-SM1030 

Download product datasheet

[contact-form-7]