Main features

SINGLE PHASE THERMAL DISINFECTION INSTRUMENT WASHER ACCORDING TO EN 15883 – DRYING SYSTEM

• WASHING UP TO 95°C – THERMAL DISINFECTION
• MICROPROCESSOR PROGRAMMABLE ELECTRONICS, UP TO 15 PROGRAMS
• SERIAL PORT RS232 FOR CONNECTION TO EXTERNAL PRINTER OR PC
• LIQUID DETERGENT DOSAGE PUMP WITH SENSOR LEVEL
• NEUTRALIZER LIQUID DOSAGE PUMP WITH SENSOR LEVEL
• STAINLESS STEEL CHAMBER AISI 316L AND EXTERNAL PANELS IN AISI 304
• EXTERNAL DIMENSIONS LXWXH (MM) 450650X850
• INTERNAL WORKING DIMENSIONS LXWXH (MM) 380X480X590
• CHAMBER VOLUME: 107 LITERS
• INCORPORATED WATER SOFTENER – VOLUMETRIC REGENERATION WITH SALT LEVEL SENSOR
• WATER SUPPLY: COLD WATER AND DEMINERALIZED WATER CONNECTION
• ELECTRICAL CONNECTION: I/N/PE 230V – 50Hz 3.3Kw

SME-WD2145D TECHNICAL FEATURES (All Versions)

Electronic control	Microprocessor
Standard programs stored	15
Customized programs	6
Traceability	Storage of data 100 most recently run programs
Communication Led Icons	yes
Cycle storage	Yes, WD trace/excel format
Phase parameters	type of water, detergent quantity, target temperature, extension time in minutes, temperature
Tank internal temperature	from room temperature to 95°C
Accuracy	0.1°C
Temperature sensors in wash chamber	2 x PT 1000 CLASS B IEC 60751
Detergent dosing pumps	2 liquid pumps
Detergent level sensor	Yes
Duct for introducing external temperature probes	yes
RS232 serial port for PC connection printer	yes
Safety Features	Safety Thermostats, door interlock
Safety Lock	Yes, with electromagnetic release and automatic opening
Alarm display and message indicators	9
Vapor condenser	yes
AUXILIARY FUNCTIONS
WATER SUPPLY (PRESSURE 1 ,5-5 BAR)
Cold water inlet	yes
Water softener incorporated	yes
WATER HEATING
Electrical	3 kW max.
STEAM CONDENSER	Yes
DIMENSIONS LxDxH mm
Outside              (with built-in top)Inside Net weight (Kg)	450x650x850 (830)380x480x590 50
STAINLESS STEEL
Wash tank	ASI 316L
Exterior covering	ASI 304
ELECTRICAL POWER SUPPLY
Max. voltage/power	I/N/PE 230V – 50Hz 3.3Kw
NOISE LEVEL	max 50 dB
Conformity	93/42/CEE,72/23/CEE,93/68/CEE,89/336/CEE,EN61010-1,EN60110-2-045,EN61326:1997+A1:1998,EN153883-1-2:2006

 

 

Model	Volume	Chamber Dimensions mm	Overall dimensions mm (WxHxL)	Voltage	power
SME-WD2145D	107 L	LXWXH (MM) 380X480X590	LXWXH (MM) 450X650X850(830)	1/N/PE 230V – 50Hz 3.3 Kw	3.3 KW MAX

 

BASIC UPPER TROLLEY 45CMBasic upper Basic lower trolley 45CMBasic lower trolley for the SME-WD2145D model. It holds baskets and supports for surgical instrument treatment.D-CS2 trolley with sprayer for the SME-WD2145D model. It holds baskets and supports for surgical instrument treatment.D-CS1

Basic lower trolley 45CMBasic lower trolley for the SME-WD2145D model.It holds baskets and supports for surgical instrument treatment.D-CS2

D-SM6 HAND PIECE WASHING SUPPORTHand piece washing support for SME-W2145D. It is supplied with a standard set consisting of 6 silicone rings, 6 filters and 2 nozzles. Made of stainless steel.

D-SM6+D-CS1HAND PIECE ON TROLLEYHand piece washing support D-SM6 must be positioned on D-CS1 trolley as shown in the figure at the side.

Many more accessories are available according to your needs.

Download product datasheet

[contact-form-7]