MODEL MOON SME-WD2145D
Main features
SINGLE PHASE THERMAL DISINFECTION INSTRUMENT WASHER ACCORDING TO EN 15883 – DRYING SYSTEM
- WASHING UP TO 95°C – THERMAL DISINFECTION
- MICROPROCESSOR PROGRAMMABLE ELECTRONICS, UP TO 15 PROGRAMS
- SERIAL PORT RS232 FOR CONNECTION TO EXTERNAL PRINTER OR PC
- LIQUID DETERGENT DOSAGE PUMP WITH SENSOR LEVEL
- NEUTRALIZER LIQUID DOSAGE PUMP WITH SENSOR LEVEL
- STAINLESS STEEL CHAMBER AISI 316L AND EXTERNAL PANELS IN AISI 304
- EXTERNAL DIMENSIONS LXWXH (MM) 450650X850
- INTERNAL WORKING DIMENSIONS LXWXH (MM) 380X480X590
- CHAMBER VOLUME: 107 LITERS
- INCORPORATED WATER SOFTENER – VOLUMETRIC REGENERATION WITH SALT LEVEL SENSOR
- WATER SUPPLY: COLD WATER AND DEMINERALIZED WATER CONNECTION
- ELECTRICAL CONNECTION: I/N/PE 230V – 50Hz 3.3Kw
SME-WD2145D TECHNICAL FEATURES (All Versions)
| Electronic control | Microprocessor |
| Standard programs stored | 15 |
| Customized programs | 6 |
| Traceability | Storage of data 100 most recently run programs |
| Communication Led Icons | yes |
| Cycle storage | Yes, WD trace/excel format |
| Phase parameters | type of water, detergent quantity, target temperature, extension time in minutes, temperature |
| Tank internal temperature | from room temperature to 95°C |
| Accuracy | 0.1°C |
| Temperature sensors in wash chamber | 2 x PT 1000 CLASS B IEC 60751 |
| Detergent dosing pumps | 2 liquid pumps |
| Detergent level sensor | Yes |
| Duct for introducing external temperature probes | yes |
| RS232 serial port for PC connection printer | yes |
| Safety Features | Safety Thermostats, door interlock |
| Safety Lock | Yes, with electromagnetic release and automatic opening |
| Alarm display and message indicators | 9 |
| Vapor condenser | yes |
| AUXILIARY FUNCTIONS | |
| WATER SUPPLY (PRESSURE 1 ,5-5 BAR) | |
| Cold water inlet | yes |
| Water softener incorporated | yes |
| WATER HEATING | |
| Electrical | 3 kW max. |
| STEAM CONDENSER | Yes |
| DIMENSIONS LxDxH mm | |
| Outside (with built-in top)Inside Net
weight (Kg) |
450x650x850 (830)380x480x590
50 |
| STAINLESS STEEL | |
| Wash tank | ASI 316L |
| Exterior covering | ASI 304 |
| ELECTRICAL POWER SUPPLY | |
| Max. voltage/power | I/N/PE 230V – 50Hz 3.3Kw |
| NOISE LEVEL | max 50 dB |
| Conformity | 93/42/CEE,72/23/CEE,93/68/CEE,89/336/CEE,EN61010-1,EN60110-2-045,EN61326:1997+A1:1998,EN153883-1-2:2006 |
| Model | Volume | Chamber Dimensions mm | Overall dimensions mm (WxHxL) | Voltage | power |
| SME-WD2145D | 107 L | LXWXH (MM) 380X480X590 | LXWXH (MM) 450X650X850(830) | 1/N/PE 230V – 50Hz 3.3 Kw | 3.3 KW MAX |
BASIC UPPER TROLLEY 45CMBasic upper Basic lower trolley 45CMBasic lower trolley for the SME-WD2145D model. It holds baskets and supports for surgical instrument treatment. D-CS2 trolley with sprayer for the SME-WD2145D model. It holds baskets and supports for surgical instrument treatment.D-CS1 |
| Basic lower trolley 45CMBasic lower trolley for the SME-WD2145D model.It holds baskets and supports for surgical instrument treatment.D-CS2 |
| D-SM6 HAND PIECE WASHING SUPPORTHand piece washing support for SME-W2145D. It is supplied with a standard set consisting of 6 silicone rings, 6 filters and 2 nozzles. Made of stainless steel. | D-SM6+D-CS1HAND PIECE ON TROLLEYHand piece washing support D-SM6 must be positioned on D-CS1 trolley as shown in the figure at the side. |
Many more accessories are available according to your needs.
